Glass door smart lock selection
Glass Door Smart Locks for Frameless and Framed Doors
Choose A7 glass-door smart locks by frameless or framed construction, clamp or drilling method, access package, app version, sample, and OEM scope.
You can start with photos, rough quantity, destination market, or an unsure glass-door note. SivoLock can help confirm glass thickness, gap, frame, and hardware details later.
Use glass construction, clamp or drilling method, gap, frame thickness and access package before choosing A7 fingerprint, optional face recognition or a nearby hardware path.
Buyer summary
Choose glass door smart locks by glass construction, installation method, and access package.
Start with frameless glass, framed glass, clamp or drilling, fingerprint or optional 3D face recognition, then add app, sample, and OEM requirements as they become clear.
Frameless or framed glass first
Start with the door construction: frameless glass, framed glass, or an unsure mixed condition. A front photo and one frame photo are enough to begin.
A7 is the main glass-door result
A7 covers 8-12 mm frameless glass, 4-15 mm glass gap, 30-120 mm framed-door fit, and clamp or drilling package review.
Fingerprint or optional face recognition
Choose the fingerprint version for 4 AA battery access, or the optional 3D face-recognition version when contactless entry and 4000 mAh lithium power fit the brief.
Inquiry can start with partial details
Photos, rough quantity, destination market, or a short glass-door note can start the discussion. Unknown clamp, drilling, app, sample, and OEM details can be added later.
Fit decision
Decide whether A7, profile-door hardware, or another door category fits the project.
A7 is the starting point for glass doors. Check nearby profile-door or entrance options only when the real door evidence points away from glass-door clamp or drilling hardware.
Frameless glass
Use A7 when the glass is 8-12 mm and the 4-15 mm gap, keeper position, clamp size, and swing direction can be checked from photos or drawings.
Framed glass
Use A7 when the framed-door fit is around 30-120 mm, with drilling permission, frame thickness, and panel clearance checked before sample approval.
Clamp vs drilling
Separate no-drill clamp hardware from drilled framed-door installation. If the installer has not decided, send both glass and frame photos first.
Nearby paths when the door is not glass
Check profile-door hardware when frame width and mortise/backset are the real issue, or entrance face-recognition hardware when the lock is for a main door.
Product finder
Select glass construction, installation method, and access package.
Start with frameless or framed glass, then choose clamp or drilling direction and fingerprint or optional face-recognition access. If details are unclear, keep Not sure selected and send photos first.
What glass construction are you working with?
Which installation method is preferred?
Which access package should be checked?
A7 fingerprint glass-door package
A7 fingerprint version for frameless or framed glass; check 8-12 mm frameless glass, 4-15 mm gap, 30-120 mm framed-door fit, clamp or drilling, Tuya, optional TTLock, and 4 AA batteries.
A7 optional face-recognition package
A7 optional 3D face recognition for glass-door projects; confirm glass thickness, gap, frame thickness, clamp or drilling method, Tuya or optional TTLock, 4000 mAh lithium battery, and 5 V Type-C access.
Profile-door alternative
Check profile-door hardware when the frame section, mortise, backset, or profile width matters more than glass clamp hardware.
Entrance face-recognition alternative
Check entrance face-recognition hardware when the door is not a glass-door installation and the project needs a larger 3D face-recognition entrance lock.
Send glass-door photos, rough quantity, market, or an unsure note for a fit review.
Version, model and hardware package
Compare A7 fingerprint, optional face-recognition, platform, clamp, drilling, and hardware package choices.
Keep the A7 fingerprint and optional face-recognition versions separate because battery, Type-C access, capacity, sample checks, and app setup can change with the chosen package.
A7 fingerprint package
Choose when frameless or framed glass needs fingerprint, password, RFID card, mechanical key, Tuya, optional TTLock, 4 AA batteries, clamp or drilling checks, and IP55 covered-use guidance.
Compare A7 fingerprintA7 optional face-recognition package
Choose when the glass-door project needs optional 3D face recognition, 4000 mAh lithium battery, 5 V Type-C emergency power, Tuya, optional TTLock, and the same A7 fit checks.
Compare A7 face optionProfile-door alternative
Check when frame width, profile section, mortise, backset, handle clearance, or a profile-door installation path matters more than glass-door clamp hardware.
Check profile-door alternativesEntrance face-recognition alternative
Check when the project is a villa, security, wooden, or entrance door needing a larger 3D face-recognition lock instead of glass-door hardware.
Check entrance face-recognitionKey specs
Key specs to confirm for A7 glass-door projects
A7 glass-door selection centers on 8-12 mm frameless glass, 4-15 mm gap, 30-120 mm framed-door fit, standard no-drill frameless: 8-12 mm, standard drilled framed: 30-90 mm shown, optional clamp sizes: 2.3/3.5/4.2/4.7/5.0/5.35 cm, frame thickness, clamp size, drilling permission, swing direction, IP55, Tuya, optional TTLock, 4 AA batteries, 4000 mAh lithium battery, and 5 V Type-C emergency power. Access methods include model-dependent fingerprint, password, RFID card, mechanical key, and App access.
| Version | Best fit | Hardware checks | Useful details to share |
|---|---|---|---|
| A7 fingerprint version | Frameless or framed glass doors needing credential access without face recognition | 8-12 mm frameless glass; 4-15 mm gap; 30-120 mm framed-door fit; no-drill clamp or drilled framed-door package; IP55 | Door photos, glass thickness, gap, frame thickness, drilling permission, swing direction, Tuya or TTLock, finish, quantity, market |
| A7 optional face-recognition version | Glass-door projects needing contactless access plus the A7 installation package | Optional 3D face recognition; 4000 mAh lithium battery; 5 V Type-C emergency power; same frameless, framed, clamp, drilling, and gap checks | Face-recognition need, glass and frame photos, clamp size, app version, sample timing, OEM notes, quantity, destination |
Image checkpoints
Check front/rear photos, glass thickness, glass gap, frame thickness, clamp size, drilling permission, and swing direction.
Photos and rough measurements help separate frameless glass, framed glass, no-drill clamp, drilled framed-door installation, and A7 version choice before sample or OEM details are finalized.
Show front and rear glass, glass thickness, glass gap, frame thickness, clamp size, drilling permission, keeper, swing direction and installed-door evidence in one review scene.
Front, rear, and side photos
Show both panels, side profile, handle area, hinge side, keeper area, and the planned lock position on the actual glass door.
Glass thickness and edge view
Measure or photograph 8-12 mm frameless glass, framed glass thickness, gasket, trim, and any decoration that changes hardware clearance.
Glass gap and frame thickness
Show the 4-15 mm glass gap, frame thickness, keeper landing point, and fixed panel or frame condition before choosing clamp or drilling.
Clamp size or drilling permission
Share whether no-drill clamp installation is required, whether drilling is allowed, and any available clamp size or drilled framed-door drawing.
Swing direction and handing
Confirm left or right, inward or outward, single or double leaf, sliding or swing behavior, and installer notes when available.
Sample, app, finish, and OEM references
Send Tuya, optional TTLock, finish, logo, packaging, label, language, sample timing, and market document notes if those details already exist.
Start the inquiry
Send the glass-door details you have now.
You do not need every detail to request pricing. Photos, rough quantity, destination market, glass type, access package, or a simple unsure message are enough to start; these checkpoints simply help SivoLock narrow A7 version, clamp, drilling, sample, and OEM scope faster.
Missing details are okay. Send what is available now and mark unknown items as unsure; SivoLock can review glass-door fit before final pricing.
Fit, sample and OEM support
Confirm samples, OEM support, and installation documents for glass-door projects.
After the A7 direction is clear, confirm version, platform, clamp or drilling package, drawings, finish, accessory scope, sample kit, packaging, and OEM needs.
Glass-door fit review
SivoLock can review photos, glass thickness, gap, frame thickness, drilling or clamp direction, and A7 version choice while some measurements are still missing.
Sample approval
Sample checks can include A7 version, platform, panel size, clamp hardware, drilling drawing, power package, finish, accessory list, and installation documents.
OEM details
Logo, finish, packaging, label, language setup, neutral pack, market documents, and private-label notes can be confirmed after the fit direction is clear.
Installation documents
Ask for A7 drawings, clamp references, framed-door drilling notes, app setup, emergency-access instructions, and hardware-package guidance.
Related options
Compare nearby glass-door, profile-door, entrance, and accessory options.
Open the closest model, nearby category, or contact path when the project needs A7, profile-door hardware, entrance face recognition, accessory checks, or a quick fit review.
Nearby comparison: choose A7 fingerprint for standard glass-door credential access, A7 optional face recognition for contactless entry, profile-door alternatives for frame and mortise questions, entrance face-recognition for main-door locks, or accessory review when clamp, keeper, strike, or spare hardware needs a separate check.
Buyer FAQ
Check common glass door smart lock questions.
Check A7 fit, fingerprint vs optional face recognition, clamp or drilling, glass thickness, sample timing, OEM details, and low-friction inquiry timing.
Can I ask before I know the exact glass thickness?
Yes. Send photos, rough quantity, destination market, and any known glass or frame detail first. Glass thickness, 4-15 mm gap, clamp size, drilling, app version, sample, and OEM details can be added later.
Is A7 the main glass-door smart lock choice?
Yes. A7 is the main glass-door direction for framed or frameless projects. It still needs door photos, 8-12 mm frameless glass checks, 30-120 mm framed-door checks, frame thickness, and swing direction review.
Should I choose fingerprint or optional face recognition?
Choose fingerprint when credential access and 4 AA batteries are enough. Choose optional 3D face recognition when contactless entry, 4000 mAh lithium battery, and 5 V Type-C emergency power fit the project.
Can sample and OEM details be discussed early?
Yes. Finish, logo, packaging, label, language, market documents, sample timing, Tuya or optional TTLock, and accessory scope can be discussed before every measurement is final.
Next step
Request glass door smart lock pricing and fit review.
Send any glass-door photos, rough quantity, market, frameless or framed note, clamp or drilling preference, or access-package need. SivoLock can confirm whether A7 fingerprint, A7 optional face recognition, profile-door hardware, accessories, sample, or OEM support is the right next check.
Useful details to include
- Any front, rear, side, frame, gap, keeper, clamp, drilling, or installed-door photos
- Frameless glass, framed glass, A7 fingerprint, optional 3D face recognition, Tuya, TTLock, or unsure
- Known glass thickness, 4-15 mm gap, frame thickness, 60-70 mm not applicable, clamp size, drilling note, swing direction, or unknown items
- Quantity, destination market, finish, sample timing, logo, packaging, label, language, document, or OEM notes
- likm98154@gmail.com