Local
Users are added and removed at the lock itself. Suits doors that need no phone management.
The A2 IP66 waterproof smart lock is a lever lock for villa, security, copper and wooden entrance doors 40–120 mm thick. It opens by fingerprint, PIN, RFID card or key, runs on 4 AA batteries and comes in local, Tuya or TTLock versions.

A2 comes in three versions; specify the version for each order line, with separate quantities in a mixed order. All three hold up to 300 credentials in total, shared across fingerprints, PINs and RFID cards, so plan the mix around the actual users.
Users are added and removed at the lock itself. Suits doors that need no phone management.
Managed from the phone in the Tuya app. Tell us which remote functions you need, and we will confirm them for this version.
Managed in the TTLock app, for sites already using it. Remote access needs a TTLock gateway and a Wi-Fi connection.
See app, gateway and access management for how the platforms differ.
The 73 mm wide panels need a broader mounting face than our profile-door locks, plus room for the 140 mm lever beside the frame. On a replacement door, check that the panels cover the old holes on both faces.
A2 takes 6068, 4585, Russian 6585 or Russian 6085 mortises. Each has its own case, faceplate and geometry, so send the full designation of the old body and the strike measurements. On paired doors, hold the passive leaf firmly. See security door mortises and our installation guide.
A2 runs on 4 replaceable AA batteries. If they run flat, a power bank on the 5 V Type-C port powers the lock temporarily, and the mechanical key is a second backup. The Type-C port does not charge the AA batteries.
A2 is rated IP66: dust-tight and protected against powerful water jets. It works from −30°C to 70°C, and we recommend it for exposed entrance doors when it is fitted as the installation instructions describe. Inside the panel, the circuit-board cover and motor module are sealed during assembly; see how the electronics are sealed. Keep the seals and connections intact during fitting, and check drainage at the door and frame. For coastal sites, see corrosion resistance.
| Model | Exterior panel (mm) | Protection | Power | Operation |
|---|---|---|---|---|
| A2 (this model) | 353 × 73 | IP66 | 4 × AA | Lever; fingerprint, PIN, card |
| R1 face and palm-vein lock | 345 × 70 | IP55 | 7.4 V, 5,000 mAh lithium | Automatic; 3D face, palm vein |
| R2 slim automatic face lock | 350 × 68 | IP66 screenless; IP55 screen | Screenless 4,000 mAh; screen 5,000 mAh (7.4 V lithium) | Automatic; 3D face, palm vein |
| R8 villa face recognition lock | 656 × 81 | IP55 | 5,000 mAh lithium | Automatic; 3D face; decorative pull handle |
| A2 Double-Sided | 353 × 73 | IP66 | 5,000 mAh lithium | Lever; readers on both sides |
Samples are available for evaluation; we confirm the version, door fit and accessories before an order. Test the A2 sample on your actual entrance door, with the mortise you plan to use. Check panel coverage, lever feel, strike engagement and battery access. Then fix the version (local, Tuya or TTLock) and the credential mix for the order.
Each version and mortise is its own order line. Test reports for the models they cover are listed on quality documents. Logo, finish and packaging for private-label orders are covered on OEM/ODM.
No. A2 holds up to 300 credentials in total, shared across fingerprints, PINs and RFID cards.
No. Type-C gives temporary emergency power. A2 runs on 4 replaceable AA batteries.
A2 Double-Sided, a separate model with a 5,000 mAh lithium battery and its own 6068 motorized mortise.
The full mortise designation, case and faceplate size, backset, center distance and strike, plus photos of both door faces and the old holes.
Send photos of the door and old lock, the door thickness, the mortise designation, the version, the finish and the quantity. We will confirm the fit and quote A2 for your doors. Qualifying material and manufacturing defects are covered for three years from shipment under our warranty policy.