Apartment Smart Lock

G1 Apartment Smart Lock

The G1 apartment smart lock is our lower-cost lock for rental and apartment buildings, with an iron housing in Athens black and 353 × 73 mm panels. It fits security and wooden entrance doors 40–120 mm thick, runs on 4 AA batteries and comes in a TTLock or a Tuya Wi-Fi version.

G1 apartment smart lock in Athens black
353 × 73 mmPanel size
40–120 mmDoor thickness
IronAthens black housing
4 × AAReplaceable batteries
2 versionsTTLock or Tuya Wi-Fi
Specs

G1 Specifications

Format
Apartment entrance lever
Housing
Iron
Finish
Athens black
Door thickness
40–120 mm
Panels (front and rear)
353 × 73 mm, 23 mm deep per side
Lever length
About 145.5 mm
Protection
IP55
Power
4 × AA batteries
Emergency power
5 V Type-C
Mortise options
6068, 4585, Russian 6585, Russian 6085
Access
Fingerprint, PIN, RFID card, mechanical key
Versions
G1-1 TTLock Bluetooth; G1-2 Tuya Wi-Fi
Working temperature
−25°C to 60°C
Details

Photos and Drawings

G1 apartment smart lock fitted to an apartment entrance door

G1 apartment smart lock fitted to an apartment entrance door

G1 front and rear panels side by side
G1 dimension drawing with 353 × 73 mm panel and 145.5 mm lever
G1 panels and mortise shown together, as fitted in the door
Versions

TTLock or Tuya Wi-Fi

VersionAppFingerprintsPINsCards
G1-1TTLock (Bluetooth)1002501,000
G1-2Tuya (Wi-Fi)Up to 50110110

Choose the platform by the app the property already uses, the number of users each door must hold and the site's connection. G1-1 holds more credentials; remote access on it needs a TTLock gateway and a Wi-Fi connection. G1-2 connects over the site's Wi-Fi. See app, gateway and access management.

Access

Tenant Turnover

When a resident leaves, the manager removes their fingerprints, PINs and cards and checks at the lock that they no longer open it, then sets up the next resident. Keep the spare mechanical keys under the manager's control. Our apartment rental solution covers the full workflow and phased rollout.

Door Fit

Door Fit and Mortise

Choose G1 when the old lock left a full-size footprint: like G2, it has a 353 × 73 mm panel, which covers more old holes than the shorter panels. G3 has the same iron housing and versions on a 310 × 65 mm panel with 13 mortise sizes, for decorated doors or buildings that mix lock bodies.

Apartment doors that look alike can have different preparations, so survey one door from each group and record its full mortise designation, strike and handing. G1 takes 6068, 4585, Russian 6585 or Russian 6085 mortises. Check that the 353 × 73 mm panels cover the old holes, and allow room for the 145.5 mm lever beside the frame. See security door mortises.

Power

Power and Location

G1 runs on 4 replaceable AA batteries, a routine the building team can repeat across units. If they run flat, a power bank on the 5 V Type-C port powers the lock temporarily, and the mechanical key is a second backup.

G1 is rated IP55 and works from −25°C to 60°C. We recommend it for indoor corridor doors and covered entrances. Care for the black iron housing as the supplied instructions describe.

Compare

Compare Apartment Models

Samples

Samples and OEM

Samples are available for evaluation; we confirm the version, door fit and accessories before an order. Fit the G1 sample on one surveyed door from each preparation group, with the installer and the building manager present. Check the mortise, panel coverage and battery access. Then add a test user, remove them and confirm the lock rejects them before approving the configuration for the building.

Packing can follow the building's door groups, so installers know which body goes where. Test reports for the models they cover are listed on quality documents. Logo, finish and packaging for private-label orders are covered on OEM/ODM.

FAQ

Frequently Asked Questions

Is G1 stainless steel?

No. G1 has an iron housing in Athens black, for lower-cost projects. G2 and G11 have SUS304 stainless steel housings.

What is the difference between G1-1 and G1-2?

G1-1 uses TTLock over Bluetooth and holds 100 fingerprints, 250 PINs and 1,000 cards. G1-2 uses Tuya over Wi-Fi and holds up to 50 fingerprints, 110 PINs and 110 cards.

Can one building use several mortises?

Yes. Group the doors by preparation and order each group with its own mortise, so the packing matches the doors.

How is G1 different from G3?

Both have iron housings and the same versions. G1 panels are 353 × 73 mm; G3 panels are shorter and narrower at 310 × 65 mm, and G3 takes 13 mortise sizes.

Get Started

Get a G1 Quote

Send photos of representative apartment doors, the door thickness, the mortise for each door group, the version and the unit count. We will confirm the fit and quote G1 for your building. Qualifying material and manufacturing defects are covered for three years from shipment under our warranty policy.