SUS304 Smart Locks
Where we use SUS304, what the grade means, and a 5-step sample check.
Before you rely on a material claim, check which parts it covers and what the evidence shows. Our smart lock material and durability guides cover SUS304 claims, sample checks, salt spray hours, and humid or coastal sites. Our own materials, finishes and test methods are on the material pages listed first.
Material grade, surface finish, IP rating and durability at a site are often treated as one claim. They answer different questions, so check each one separately.
| Question | What answers it | What it does not tell you |
|---|---|---|
| Material grade | Which parts are SUS304; on our SUS304 models, the housing components | How the surface looks, or how it holds up at a given site |
| Surface finish | The surface you see: brushed, mirror, PVD, plating or paint | The base metal underneath |
| IP rating | Protection against dust and water getting into the lock (IP55 or IP66, tested to IEC 60529) | Resistance to corrosion |
| Durability at a site | Material, finish, screws and strike together, against the site's salt, moisture and cleaning | Any single test result on its own |
Our corrosion resistance and outdoor durability pages go through each of these for our locks.
Where we use SUS304, what the grade means, and a 5-step sample check.
Corrosion behavior, weight, finishes and tooling compared, and when each makes sense.
Iron contamination, tea staining and pitting; salt spray and adhesion standards; and the cleaning steps.
IP55 vs IP66, rain, sun, cold and dust, and which models suit exposed doors.
How brushed, mirror, PVD, plated and painted finishes are made, and what to check on each.
Which finishes each model and series comes in, filtered by finish.
For buyers specifying SUS304, the core guide sits in Buying and Sourcing.
Follow a SUS304 requirement from the named parts through sample approval, quotation and the purchase order.
Which parts a SUS304 claim covers, base metal vs finish, and how to write it into the order.
Part traceability, what XRF can and cannot show, and the limits of a sample result.
| Your question | Evidence to ask for |
|---|---|
| Which parts are SUS304? | A material list naming each part, its grade and its finish |
| Does the sample match the claim? | A suitable analysis of the named part, cleaned and identified |
| How did the finish hold up in salt spray? | The method, specimen, hours, pass criterion and result |
| Is it protected against rain? | The IP report for the model, its covers and its mounting |
| Will it suit a coastal site? | Distance to the sea, materials of every exposed part, and a cleaning plan |
No. On our SUS304 models, the housing components are SUS304; internal parts, electronics and fasteners use materials suited to their job.
No. Neither identifies the grade. A suitable analysis of the named part, with its limits stated, is the check.
It depends on salt exposure, how long moisture stays on the lock and how often it is cleaned. Assess the site first; see corrosion resistance.
Send the location, how exposed the door is, and photos. We will suggest the model, finish and care plan.