Door Compatibility

Smart Lock Door Compatibility Guides

Smart lock door compatibility comes down to a few measurements and photos taken the right way. These guides show how to record a door, identify the old lock body and handing, and compare glass, profile and gate fitment before you order. For the step-by-step fitting, see our installation guide.

Start Here

Core Guides

Articles

Topic Articles

Your Door

Start With Your Door

DoorCollect firstOur models
Aluminum profile doorStile width, profile section, old mortise codeA1, A11, A6, R9
Glass doorGlass thickness, gap, framed or framelessA7
Wooden room doorThickness, latch or mortise, old holesF2, Z1
Entrance or security doorOld body's full designation (security door mortises), both faces, strikeA2, R1, R8, G-series
GateClosing stile, receiving post, gap and sagL1, A2, A11
US-format doorBore, edge hole, backsetM1, M2
FAQ

Frequently Asked Questions

Is door thickness enough to choose a smart lock?

No. The lock body, the space for the panels on both faces, the handing and the strike matter as much. Our installation guide lists each measurement.

Can I reuse the existing mortise pocket?

Sometimes. Send the code on the faceplate and photos of the door edge; we check whether one of our bodies fits the same pocket.

What is the clearest way to describe handing?

Say which side the hinges are on and whether the door opens toward you or away, viewed from outside.

Get Started

Send Your Door Details

Send photos of both faces, the door edge and the strike, with the thickness. We will tell you which model fits.