Profile Door Mortises for Aluminum and Courtyard Doors
A profile door mortise has to fit inside a narrow aluminum section and work with the way the door moves. We supply three structures for our profile door locks: swing-door bodies, multi-point bodies and lock strips, and double-hook bodies for sliding doors. Backsets run from 20 mm to 70 mm, and each body comes with its matching flat, grooved or hook strike.
- Swing-door bodies, 2585 to 7085
- Multi-point bodies and lock strips
- Double-hook bodies for sliding doors
- Flat, grooved and hook strikes

Mortise Structures and Sizes
Pick how the door moves, then the smart lock or the structure you need. Each row is a body we supply, with the strike it comes with.
All 13 bodies shown
No body matches all of these choices. Clear one, or send door photos and we will match it for you.
| Smart lock | Door | Structure | Strike | Sizes |
|---|---|---|---|---|
| A1 | Swing | Swing-door mortise | Flat | 2585 to 4585; long 5085, 6085, 7085 |
| A6 | Swing | Swing-door mortise | Flat | 2585 to 4585; long 5085, 6085, 7085 |
| A11 | Swing | Multi-point mortise | Grooved | 2585 to 4585; long 5085, 6085, 7085 |
| R9 | Swing | Multi-point mortise | Grooved | 2585 to 4585; long 5085, 6085, 7085 |
| A11 Double-Sided | Swing | Multi-point mortise | Grooved | 2585 to 4585; long 5085, 6085, 7085 |
| A6 Double-Sided | Swing | Multi-point mortise | Grooved | 2585 to 4585; long 5085, 6085, 7085 |
| R9 Double-Sided | Swing | Multi-point mortise | Grooved | 2585 to 4585; long 5085, 6085, 7085 |
| G11 | Swing | Multi-point lock strip | Grooved | 2585 to 5085 |
| A6 | Sliding | Double-hook sliding mortise | Double-hook | 2085, 2885, 3585 |
| A11 | Sliding | Double-hook sliding mortise | Double-hook | 2085, 2885, 3585 |
| G11 | Sliding | Double-hook sliding mortise | Double-hook | 2085, 2885, 3585 |
| A11 | Sliding | Double-hook multi-point (option) | Double-hook | 3585 |
| G11 | Sliding | Double-hook multi-point (option) | Double-hook | 3585 |
The first two digits give the backset in mm and the last two the center distance (85 mm on most bodies). Definitions are on the mortises and lock bodies page; the sizes offered for each lock are on its model page.
Swing or Sliding First
Start with how the door moves. A swing-door body throws a latch and bolt sideways into the frame. A sliding door needs a double-hook body: two hooks swing up and down into a hook strike, so the door cannot slide open. A swing-door body does not work on a sliding door.
Fit the Body to the Profile Section
The backset has to fit inside the profile's chamber, with room for the case and the spindle. Narrow sections take the short backsets, 2585 or 2885; deeper sections take 4585 or the long 5085 to 7085 bodies. On thermally broken profiles, check the internal chambers, the thermal barrier and the fixing positions against the mortise drawing, so the case clears the thermal break. This applies to every profile model: A1, A11, A6, R9, their double-sided versions and G11.
Send the profile cross-section drawing or a photo of the door edge with a ruler. We match the body, faceplate and spindle to it.
Multi-Point Locking
A multi-point body or lock strip adds locking points above and below the main body, so the door is held along its height. The whole strip, the frame strike plates and the door height must match. Order the body, strip and strikes as one set, and approve them on a sample door at full height.
Strikes for Profile Doors
Each body in the table is supplied with the strike listed for it: flat on our swing-door bodies, grooved on the multi-point bodies and hook strikes on the double-hook bodies. The final choice also depends on the frame: its section, openings, mounting surface, engagement depth and the gap at lock height. A double-hook body always needs a hook strike.
Frequently Asked Questions
Can a swing-door body be used on a sliding door?
No. Sliding doors need a double-hook body and a hook strike.
Does 3585 give the whole installation size?
No. It gives the backset (35 mm) and center distance (85 mm). Case depth, faceplate and spindle size are separate dimensions.
Is multi-point locking just a different main body?
No. It also needs the lock strip, the extra strike plates and a door of the right height. Order them together.
Are flat and grooved strikes interchangeable?
Not as a rule. Each is matched to its body and the frame's openings, so order the strike with the body and send the frame section if you are unsure.
What do you need to quote a profile mortise?
The smart lock model, the profile drawing or an edge photo with a ruler, whether the door swings or slides, and the quantity.
Match the Body to Your Profile
Send the profile drawing, door motion, smart lock model and quantity. We will confirm the body, strike and spindle for your section.