Indoor Door Smart Lock

Z1 Compact Smart Lever Lock

The Z1 compact smart lever lock puts fingerprint and PIN entry into a lever and 65 mm rosette, for indoor doors 35–50 mm thick where a full panel would be too large. It runs on 4 AAA batteries and comes in stainless steel or black iron, with optional RFID cards.

Z1 compact indoor smart lever lock
65 mmRosette diameter
35–50 mmDoor thickness
4 × AAAReplaceable batteries
60 / 70 mmAdjustable backset
2 materialsStainless steel or black iron
Specs

Z1 Specifications

Format
Compact indoor lever and rosette
Housing
Stainless steel version SUS304; black version iron
Finishes
Stainless steel; black
Door thickness
35–50 mm
Size
Lever assembly about 173 × 65 mm; 65 mm rosette
Protection
IP55
Power
4 × AAA batteries
Emergency power
Type-C
Lock body
60/70 mm adjustable; optional 4585 mortise (240 × 22 mm faceplate, 45 mm backset, 85 mm center distance)
Access
Fingerprint, PIN, mechanical key; RFID card optional
App
Optional: TTLock or Tuya Bluetooth
Working temperature
−25°C to 60°C
Details

Photos and Drawings

Z1 smart lever lock fitted to an indoor door

Z1 smart lever lock fitted to an indoor door

Z1 outside and inside levers side by side
Z1 dimension drawing with 65 mm rosette
Z1 lever with adjustable latch and 4585 mortise options
Z1 in stainless steel and black
Design

A Compact Lever Instead of a Panel

Z1 keeps the look of an ordinary lever and rosette, which suits restrained interiors. Because the rosette covers less of the door than a panel, check on a replacement that it still covers the old holes and marks. The material follows the finish: the stainless steel version is SUS304, the black version iron, for lower-cost projects.

Versions

Access and Versions

VersionFingerprintsPINsCards
TTLock (optional)100200Optional RFID version
Tuya Bluetooth (optional)Up to 50110110

Fingerprint and PIN are the everyday methods; specify RFID with the order if cards are needed. Remote access on the TTLock version needs a TTLock gateway and a Wi-Fi connection. See app, gateway and access management.

Door Fit

Door Fit and Lock Body

The adjustable latch sets to a 60 mm or 70 mm backset. The optional 4585 mortise has a 240 × 22 mm faceplate, a 45 mm backset and an 85 mm center distance. Choose the body, spindle, fixing pattern and strike together before the door is prepared, and leave hand space beside the frame. See indoor door mortises.

Power

Power and Location

Z1 runs on 4 replaceable AAA batteries. If they run flat, a power bank on the Type-C port powers the lock temporarily, and the mechanical key is a second backup. Z1 is rated IP55 (protected against dust and water jets) and works from −25°C to 60°C. It is made for indoor doors, and that is where we recommend it.

Compare

Compare Indoor Door Models

Samples

Samples and OEM

Samples are available for evaluation; we confirm the version, door fit and accessories before an order. Fit the Z1 sample on the actual room door. Check rosette coverage, lever clearance and that the latch meets the strike with the door closed. Approve the material and finish, then test adding and removing a user, with RFID if ordered.

The stainless steel and black iron versions are separate products, each with its own material description. Test reports for the models they cover are listed on quality documents. Logo, finish and packaging for private-label orders are covered on OEM/ODM.

FAQ

Frequently Asked Questions

Is 173 × 65 mm a panel size?

No. It is the size of the lever assembly; Z1 has a lever and a 65 mm rosette instead of a panel.

Are both finishes the same material?

No. The stainless steel version is SUS304; the black version is iron.

How many PINs does the TTLock version hold?

200 PINs and 100 fingerprints. RFID cards are an option to specify with the order.

What should I check on a replacement door?

The smaller rosette covers less than a panel, so measure the old holes and marks, and check them together with the lock body and lever clearance.

Get Started

Get a Z1 Quote

Send the door thickness, photos of the door face and edge, the lock body, the finish, whether you need RFID, and the quantity. We will confirm the fit and quote Z1 for your doors. Qualifying material and manufacturing defects are covered for three years from shipment under our warranty policy.