Colors and Finishes

Smart Lock Colors and Finishes

Our smart lock colors and finishes come in seven standard names: stainless steel, Athens black, black, red bronze, starry gray, titanium gold and black bronze. Each model offers its own set, and on a few models the color also changes the housing material. Pick a finish in the table below to see which models offer it.

Smart lock front panels in seven finishes side by side, same angle and lighting
All Models

Finish Options by Model

Pick a finish to see which models and series offer it, with the housing material under it. Clear the choice to see everything again.

Finish
Type

All 24 entries shown

ModelFinishesHousing
A1Stainless steel; Athens blackSUS304 stainless steel housing components
A11Stainless steel; Athens black; titanium gold; red bronzeSUS304 stainless steel housing components
A6Athens black; red bronzeSUS304 stainless steel housing components
R9Stainless steel; starry gray; red bronzeSUS304 stainless steel housing components
A2 Double-SidedStainless steel; Athens blackSUS304 stainless steel housing components
A11 Double-SidedStainless steel; Athens black; red bronzeSUS304 stainless steel housing components
A6 Double-SidedStainless steel; red bronze; Athens blackSUS304 stainless steel housing components
R9 Double-SidedStainless steel; starry gray; red bronzeSUS304 stainless steel housing components
A2Stainless steel; red bronze; Athens blackSUS304 stainless steel housing components
R1Red bronze; starry gray; stainless steelSUS304 stainless steel housing components
R2Starry gray; stainless steelSUS304 stainless steel housing components
R8Red bronze; black bronzeSUS304 stainless steel housing components
G1Athens blackIron
G2Athens black; stainless steelSUS304 stainless steel housing components
G3BlackIron
G11Stainless steel; Athens blackSUS304 stainless steel housing components
A7Stainless steelSUS304 stainless steel and aluminum-alloy components
L1Stainless steel; blackSUS304 front housing; rear body in iron or stainless steel
F2Stainless steel; Athens blackSUS304 stainless steel housing components
Z1Stainless steel; blackStainless steel version SUS304; black version iron
M1Black; stainless steelSUS304 stainless steel housing components
M2Stainless steel; blackStainless steel version SUS304; black version iron
J SeriesStainless steel; dark tones; gold tone on selected long-panel locksSUS304 stainless steel hardware components
RA SeriesSanded; wet-ground brushed; oil-ground brushed, by codeSUS304 panels and handles

The finish name is the appearance; the housing column shows the material under it. A black finish can be SUS304 or iron depending on the model, so keep the model, finish and housing together on quotations, samples and cartons.

Finishes

What to Check by Finish

FinishWhat to check on the sample
Stainless steelThe grain runs the same way on the front, rear and handle; wipe along the grain
Athens blackFingerprints and dust under the room's lighting, and the gloss next to black hinges or frames
BlackWhich material the model uses in black: iron on G3 and the black Z1 and M2, SUS304 on M1, and on L1 a SUS304 front housing with an iron or stainless steel rear body
Red bronzeThe tone in daylight and indoor light; metallic tones shift between the two
Starry grayHow it reads against warm and cool door colors
Titanium goldReflections at the angle people will see it on the door
Black bronzeThe tone next to the door's other dark hardware
Approval

How to Approve a Finish

  1. Choose the model first. Finishes vary by model, so pick the lock that fits the door, then its finish.
  2. Use a physical sample. Photos and screens shift color; judge the actual panel.
  3. Check it in two lights. Daylight and the lighting where it will be installed, at the same angle each time.
  4. Look beyond the face. Check the handle, edges and rear panel as well as the front.
  5. Compare it with the door hardware. Hold it next to the hinges, handles and frame it has to match.
  6. Record the result. Keep the model, version, finish name and approved sample for repeat orders.

How each finish is made, and what to check on a finished panel, is on surface finishing.

Custom

Custom Colors

Custom colors and finish matching can be reviewed for project orders. For a solid color, give a RAL code with a physical RAL sample: the RAL Classic range has 216 shades, and RAL itself notes that printed charts do not reproduce every shade accurately. For a metallic tone, send a physical sample of the hardware you want to match. Include the model, quantity and where the lock will be fitted. Logo, labels and packaging are covered on OEM/ODM.

FAQ

Frequently Asked Questions

Can I order any finish on any model?

No. Each model offers the finishes listed for it; the table above shows them all. Other finishes can be reviewed as custom requests for project orders.

Is a black lock always stainless steel?

No. Athens black models have SUS304 housing components, except G1. G3 and the black versions of Z1 and M2 are iron; M1 is SUS304 in black. Black L1 has a SUS304 front housing, with the rear body in iron or stainless steel.

Can one project use several finishes?

Yes. Record the model, version, finish and quantity for each door group, and keep spares in the same finishes.

Which finish hides fingerprints best?

Brushed stainless steel tends to hide light fingerprints and dust better than dark or mirror-like finishes. Check the sample under the room's lighting.

Can you match our brand color?

Custom colors can be reviewed for project orders. Send a physical RAL sample for solid colors or a hardware sample for metallic tones.

Get Started

Request a Finish Sample

Send a photo of the door and its hardware, the model and finish you want, and the quantity. We will prepare a sample in that finish.