Hotel Card Locks

J Series Hotel Card Locks

J Series hotel card locks give guest rooms a choice of four SUS304 stainless steel locks. J1, J2 and J3 open with RFID hotel cards and a mechanical key; J11 is a narrow smart lock with fingerprint, PIN and the TTLock app. Orders can also include a compatible encoder, guest and staff cards, extra readers and room power switches, as the hotel needs.

J Series hotel card locks J1, J2, J3 and J11, front view
4 modelsCompact, long and narrow panels
J1 · J2 · J3RFID card and key
J11Fingerprint, PIN, TTLock app
SUS304Stainless steel hardware
Encoder and cardsAvailable with the locks
Models

The Four Models

J1 compact hotel card lock with separate reader and lever
RFID card · key

J1 Compact

A small reader and handle for rooms where a long panel would look too heavy. It covers less of the door, so check the old holes on a replacement.

J2 long-panel hotel card lock
RFID card · key

J2 Long Panel

The conventional hotel lock: a 300 × 72 mm panel with the card reader and lever, for most guest-room doors.

J3 wide-panel hotel card lock
RFID card · key

J3 Wide Panel

A 300 × 76 mm panel, 4 mm wider than J2, for a broader look or to cover more of the door face.

J11 narrow-panel hotel smart lock
Fingerprint · PIN · app

J11 Narrow Smart Lock

A narrow 290 × 40 mm panel with fingerprint, PIN, card, key and the TTLock app, for properties that want app-managed access.

Specs

J Series Specifications

ModelSizeAccessLock body
J1Compact reader and handle, 65 × 65 mm and 88 × 66 mmRFID hotel card, mechanical keyMatched to the door's drawing
J2Panel 300 × 72 × 13 mmRFID hotel card, mechanical keyMatched to the door's drawing
J3Panel 300 × 76 × 13 mmRFID hotel card, mechanical keyMatched to the door's drawing
J11Panels 290 × 40 mm; 131 mm leverFingerprint, PIN, RFID card, mechanical key, Bluetooth, TTLock app, temporary passwords; remote control optional4585 mortise option

All four use SUS304 stainless steel hardware components. Finishes are stainless steel and dark tones, with a gold tone on selected long-panel locks; approve the model and finish together on a sample.

Details

Photos

J Series card lock fitted to a hotel guest-room door

J Series card lock fitted to a hotel guest-room door

Hotel card encoder with guest and staff cards
Card-operated room power switch
J Series locks in stainless steel, dark and gold-tone finishes
Choosing

Card Lock or Smart Lock

Choose J1, J2 or J3 when guests receive a card at reception: the card opens the room, and the mechanical key is the backup for staff. Choose between them by look and by how much of the door face the lock must cover.

Choose J11 when the property wants fingerprint, PIN or app access in a narrow panel. The TTLock app manages J11's own users and temporary passwords; remote access needs a TTLock gateway and a Wi-Fi connection. Reception card issuing runs on the hotel system's encoder and software, so test the actual combination on a trial room. See app, gateway and access management.

System

The Hotel System Package

A hotel order is more than the locks. List each item and its quantity:

ItemWhat to decide
Management stationRoom setup and how reception works
Card encoderThe issuing device at reception
Guest and staff cardsCard type, quantity and spares
Room locksModel, finish, handing, lock body and quantity
Extra card readersWhere readers are needed beyond room doors
Room power switchesCard interaction and electrical scope
Trial-room kitSample lock, cards, instructions and spare parts

In a typical card-lock system of this kind, guest and staff cards are 13.56 MHz Mifare 1 (S50) cards, or 125 kHz T5557 cards on some systems, written by a desktop USB encoder at reception; the room power switches read the same card type. We confirm the card type, encoder and switch for the J models in your proposal. Cards, encoder and locks must belong to the same system. Room power switches are wired into the room's electrics, so agree their installation with the hotel's electrical contractor. How reception, staff access and phased rollout work is covered on hotel smart lock systems.

Ordering

Samples, Quantities and Timing

A trial-room set (lock, encoder and cards) is typically ready in 7–15 days. Standard J Series orders can be quoted from a single trial room upward, and the main order usually ships 30–45 days after the trial room is approved, depending on room count, finish and lock bodies. Private-label hotel locks follow our OEM/ODM ranges. Exact quantities and dates are agreed with each hotel, based on the rooms and the delivery plan.

Door Fit

Existing Hotels and Door Fit

If the hotel keeps its card system, cards or some of its locks, send the system name and a photo of a guest card; we check compatibility before quoting and test the combination on a trial room. Measure each door's thickness, lock body, edge preparation and strike, and compare the old holes on both faces with the new panel. Floors renovated at different times often have different preparations, so group the doors before ordering. J11 has a 4585 mortise option; J1, J2 and J3 are matched to the door's own drawing. See indoor door mortises.

Compare

Compare Hotel, Apartment and Mechanical Options

How the door is managedChoose
Guest cards issued at receptionJ Series
App-managed rental unitsApartment smart locks
Electronic room and office doorsIndoor door smart locks
Mechanical locks, no electronicsRA Series
Samples

Samples and OEM

Samples are available for evaluation; we confirm the version, door fit and accessories before an order. Set up one trial room with the chosen lock, finish, encoder and cards. Have reception issue a card, extend a stay and replace a lost card using the system's own procedure, and check at the door when the old card stops working. Then test staff cards and the backup key with the door closed before approving the configuration for the remaining rooms.

Pack and label each room group by preparation, handing and finish, and keep cards, encoders, readers and switches as separate order lines. Logo, card artwork, labels and packaging for private-label orders are covered on OEM/ODM.

FAQ

Frequently Asked Questions

Do all four models have fingerprint and the TTLock app?

No. J1, J2 and J3 open with RFID hotel cards and a mechanical key. J11 adds fingerprint, PIN, Bluetooth and the TTLock app.

Do J Series locks work with my existing hotel software?

It depends on the card system in use. Send the system name and a photo of a guest card, and we will check compatibility before quoting.

Can you supply the encoder and cards with the locks?

Yes. A hotel order can include the encoder, guest and staff cards, extra readers and room power switches. List each item and its quantity.

What is the difference between J2 and J3?

The panel width: J2 is 300 × 72 mm and J3 is 300 × 76 mm, both 13 mm deep.

Get Started

Request a Hotel Proposal

Send the number of rooms, photos of a typical room door and its old lock, the door preparation, your card system if you keep one, the model and finish, and the accessories you need. We will propose the locks and system package for your property. Qualifying material and manufacturing defects are covered for three years from shipment under our warranty policy.