Topic article · Buying and Sourcing

Smart Lock MOQ and Order Quantity Planning for Importers

Article contents 12 sections

To plan a smart lock order quantity, start from what you need per model and finish, apply the minimum and order multiple confirmed for each line, and work out how many units you would buy above demand before you compare unit prices. The minimum order quantity (MOQ) figure says little until you know what it applies to: a 150-unit minimum could cover the whole order, while another offer could require 100 units for every model-and-finish combination. For a buyer who needs 60 silver locks, 40 black locks and 50 of a second model, those two rules mean either a 150-unit purchase or a 300-unit commitment.

A final forecast can wait: the lines and rough quantities are what we need to confirm how they group. Below is how to build the plan, judge a quantity discount, handle private-label packaging, and tell staged delivery apart from a smaller production commitment. For the material side of the same purchase, see the 304 stainless steel smart lock sourcing guide.

1. Ask What the MOQ Applies To

MOQ is the smallest quantity the factory accepts for a defined scope: one order, one model, one finish, a particular configuration or a customized item. Until the scope is named, the number cannot be turned into a purchase.

Quantity conditionQuestion to settle before planning
Whole-order minimumWhich products count toward the total?
Model minimumWhich variants belong to the same model group?
Finish or color minimumDo colors combine, and is there a minimum per color as well?
Configuration minimumDoes a mortise, electronics version or platform have its own condition?
Packaging or branding minimumIs it a number of complete locks, or of printed boxes, manuals or labels?
Minimum order valueIs there a money threshold besides the unit minimum?
Order multipleMust the quantity follow fixed steps?
Price-tier quantityHow many units qualify for the quoted unit price?

Your stock-keeping units (SKUs) and the factory's MOQ groups do not have to match. A SKU identifies a variant in your inventory system; the MOQ group is how the factory counts. Two colors can be separate SKUs and share one model minimum, and products sold under one family name can carry separate commercial conditions.

Record the model, finish, lock-body configuration, electronics version and packaging version for each order line, and get the factory to state which lines combine toward each minimum. “Colors can be mixed” becomes usable once it names the colors and model, any minimum per color, and whether the mix qualifies for the quoted price. Many configuration differences create no new MOQ at all; what you want is a short set of written rules for the assortment quoted.

On our range the finishes on offer already differ by model: the A2 IP66 waterproof smart lock comes in stainless steel, red bronze and Athens black, while G1 comes in Athens black only (see smart lock colors and finishes). A color grouping can only combine the finishes a model is offered in.

2. Keep Minimums, Multiples, and Price Breaks Separate

One quotation can carry three different quantities:

  • Minimum accepted quantity: the smallest quantity the factory accepts for the group.
  • Order multiple: the steps in which that quantity can be ordered.
  • Price-break quantity: the threshold for a particular unit price.

Take an offer that accepts 100 units, requires quantities divisible by 12, and lowers the price from 300 units. 100 meets the minimum and misses the multiple; 108 is the smallest quantity that satisfies both; 300 is a price tier, and the order can be placed well below it.

Inventory systems keep the same split. Microsoft's Dynamics 365 documentation treats minimum, maximum, multiple and standard quantities as separate order settings that can vary by product variant or dimension, and a purchasing record works best with the same fields.

Confirm how a multiple is applied

“MOQ 100, order multiple 12” has two readings: any total divisible by 12 once the minimum is met, which makes 108 the smallest accepted quantity, or 100 followed by steps of 12 (100, 112, 124 and so on). The factory states which one it means.

Carton size does not set the order multiple. A carton that holds 12 locks says nothing about whether you must order in 12s: some factories accept a part carton, others ship full cartons only. Record the rule the factory states, not one worked out from the carton size.

When several constraints apply, test them together. An order can meet the model minimum and still miss a minimum order value or a custom-packaging minimum, so keep each condition on its own line rather than in one “MOQ” field.

3. Build Demand Before Adding Supplier Constraints

Start with the quantity the business needs over a defined planning period. A project uses its installation schedule plus separately identified service spares; a distributor uses demand by SKU, usable stock on hand and confirmed incoming stock. Keep forecasts apart from committed customer orders, so the share of the purchase that rests on expected sales is visible.

Planning fieldWhat it contributes
Model, finish and configurationThe exact stock that can serve the demand
Required quantity and dateTies purchasing to installation or sales
Usable stock on handAvoids buying again for demand already covered
Confirmed incoming supplyAvoids duplicate replenishment
Reserved stockKeeps the same units from being promised twice
Planned service or safety stockShows the intended buffer
Net new demandThe quantity before MOQ adjustments
Demand confidenceFirm commitments versus forecasts

For example, 80 units for upcoming installations plus 10 planned spares, less 20 usable units on hand and 30 confirmed incoming, leaves 40 units of net new demand, provided the stock on hand and incoming is the right configuration, arrives in time and is not reserved elsewhere.

Count only stock that can serve the requirement. An older hardware revision, a different mortise or packaging printed for another market can rule a unit out. Safety stock follows the business need, and units added only to reach a minimum go on a line of their own.

4. The Same Demand Can Require 150 or 300 Locks

Take a buyer who needs this assortment:

Required lineDemand
A2 / stainless steel60
A2 / Athens black40
A11 / stainless steel50
Total150

The models are real, our A2 and the A11 profile door smart lock; the quantities and the three quantity rules below are illustrations, applied to the same demand with no multiples, packaging conditions or minimum order value.

Scenario A: One minimum across the whole order

With a 150-unit order minimum and all three lines allowed to combine with no line minimums, the plan works as it stands: 60 + 40 + 50 = 150, and nothing is bought just to meet the minimum.

Scenario B: A separate 100-unit minimum for every line

If every model-and-finish combination has to reach 100, the purchase becomes:

Required lineDemandPurchase quantityUnits above demand
A2 / stainless steel6010040
A2 / Athens black4010060
A11 / stainless steel5010050
Total150300150

Keeping all three lines now takes 300 units, 150 of them above current demand. The alternatives are to negotiate the grouping, cut the assortment, postpone a slow variant or compare another offer.

Keep the excess visible by SKU. Sixty extra black A2 locks do nothing for demand for stainless A2 locks, although both are A2; an inventory total hides that.

Scenario C: A2 colors can combine

Now the rule is a 100-unit minimum across A2's two finishes plus a 50-unit minimum for A11 in stainless steel. A2 reaches 60 + 40 = 100, A11 reaches 50, and the 150-unit plan works again.

The grouping is what to negotiate, together with whether the mix qualifies for the quoted price; the headline MOQ answers neither.

Allocate a group shortfall deliberately

A combined minimum can still need extra units. Say A2 demand is 45 stainless and 25 black against a 100-unit model minimum with no color minimum or multiple. The group is 100 − 70 = 30 units short.

The factory's rule sets how many units to add, and the split is usually yours. One option is 70 stainless and 30 black (adding 25 and 5); another is 45 stainless and 55 black (adding all 30 to black). Both meet the minimum, with different inventory exposure. Put the extra units where demand is most credible or where later projects can use them, and get the allocation confirmed with the order.

5. Apply Multiples and Packaging Constraints at the Right Level

For an independent line where the total has to be divisible by a stated multiple:

Purchase quantity = round up the larger of demand or MOQ to the next permitted multiple.

With demand of 113, a minimum of 100 and a 12-unit multiple, the purchase is 120, 7 above demand. With demand of 89 under the same rules it is 108, 19 above demand.

The formula holds only where the minimum and the multiple both apply to that line. When a minimum covers several variants and carton multiples apply line by line, allocate across the variants first, then check every condition, and recheck the total after rounding, because line multiples can push the group total up.

A packaging minimum may be a separate commitment

Private-label boxes, manuals or labels can bring a quantity decision of their own. The question is whether the minimum counts complete customized sets or a print run that can be stored for later orders. If an order needs 200 locks and the printed-box run is 500, and packaging can be ordered separately, that means 200 locks and 500 boxes with 300 boxes left over; the lock quantity stays at 200.

Before accepting that arrangement, agree:

  • the price and payment date for the full packaging run;
  • ownership, storage location, protection and stock reporting for unused materials;
  • whether the remaining packaging is used on later orders, and how it is credited or issued;
  • what happens if artwork, language, product dimensions or labeling requirements change;
  • release deadlines, and the treatment of damaged, obsolete or unused stock.

Samples and print spoilage use some boxes, so 500 printed is usually fewer than 500 sets available later; the usable balance is reported after each order. Branding and packaging approval itself is covered in the private-label branding and packaging checklist, and costs that sit outside the unit price in tooling costs, NRE and MOQ.

6. Compare a Lower Unit Price With the Larger Cash Commitment

A quantity discount can lower the price per lock and raise the money committed to the order, so look at both figures and at which SKUs carry the increase.

Say one arrangement allows the 150 units needed at USD 90 each and another requires 300 units at USD 82. The configurations and cost boundary are the same; freight, financing, storage and taxes are left out of this comparison.

Measure150-unit arrangement300-unit arrangement
Unit priceUSD 90USD 82
Units purchased150300
Purchase subtotalUSD 13,500USD 24,600
Units above current demand0150
Additional purchase cash versus the smaller order—USD 11,100

The discount saves USD 8 × 150 = USD 1,200 on the 150 units needed now and adds 150 × USD 82 = USD 12,300 of inventory, a net USD 11,100 more cash in the order. The extra units are stock you can sell or install; the comparison simply puts the saving and the extra commitment side by side.

Test the later-demand assumption

If all 300 units would otherwise be bought at USD 90 on unchanged terms, the larger order's price advantage is 300 × (90 − 82) = USD 2,400, which is the most that extra costs can absorb before the advantage disappears in this comparison. It holds only if later demand arrives in the same mix and at that price, so compare with the replenishment option you really have, including its timing, freight and setup costs.

For the larger order, add your own storage, financing, insurance, handling and markdown costs, and the chance that a revision or platform change makes remaining stock harder to sell. Your own figures give a better answer than a generic holding-cost percentage.

Review sell-through by SKU

Divide each SKU's excess by its expected monthly demand to see how long the extra stock lasts. Sixty extra black A2 locks at 10 a month are six months of stock; seasonality, customer concentration and competing incoming stock move that figure.

A variant with no credible demand estimate is flagged as resting on uncertain future sales, so that a large order total cannot hide one slow finish carrying most of the risk.

Stock that loses value also has an accounting side. For entities applying IFRS, IAS 2 Inventories measures inventory at the lower of cost and net realizable value, so recoverability is assessed when selling prospects weaken, under the accounting rules your business follows. Comparing whole quotations, beyond quantity, is covered in how to compare smart lock quotations.

7. Distinguish Samples, Trial Orders, and Production Orders

Each order stage has its own purpose and its own terms:

Order stageTypical buyer objectiveCommercial question
SampleCheck the configuration and its fitWhat is supplied, at what price, and is the sample cost credited later?
Trial orderTest sales, installation or operations on a limited quantityIs the smaller quantity a one-time exception?
Pilot batchA more representative deploymentDoes the approved configuration carry into production?
Production orderThe normal selling or installation planWhich minimum, price tier and repeat-order conditions apply?

Buying samples does not lower the production MOQ, and a lower starting quantity often applies to the first order only, so get it in writing what changes afterwards: the minimum, unit price, packaging, customization or delivery schedule.

Two projects on our site show the stages in practice. In 2024 a Malaysian apartment systems supplier installed two samples on site, then ordered 1,800 standard locks, and two further orders that year added 750 sets (global project support). A Canadian door brand started in November 2024 with an initial 450 sets on one of our outdoor platforms, changing only the surface texture, branding and packaging; the first sets were delivered in April 2025 and a second order of 600 followed in October (OEM/ODM capabilities). In both, the first order kept the product close to an existing model.

Keep the trial's purpose concrete. A trial for installers needs enough units to cover the door configurations in question; a channel trial does better with a narrow assortment that produces a clear sales signal. Many variants in tiny quantities add inventory complexity and answer nothing. Before scaling up, update the demand and configuration plan with what the trial showed; the production order can differ from the sample assortment.

8. Staged Delivery Does Not Necessarily Reduce the Commitment

A factory can agree to produce 300 locks and ship 150 now and 150 later. That halves the stock in your warehouse after the first shipment, but you can still be committed to all 300.

Three dates can differ: when the order becomes binding, when the goods are produced, and when each shipment is released. Payment and ownership can follow other triggers again, so each is agreed explicitly.

ArrangementWhat to settle
One production batch, two shipmentsWhether all units are committed and produced upfront; storage, release deadlines and payment for held goods
Several production batches under one agreementFirm quantity per batch, price validity, scheduling and permitted changes
One order now, possible order laterWhich future quantities are forecasts, and what is requoted
Factory-held packaging or componentsQuantity bought, ownership, reporting, permitted use, obsolete materials

For finished locks held at the factory, settle storage conditions, damage responsibility, insurance, identification of your stock and inspection access, and what happens to finish, packaging, hardware, firmware or platform changes before the later release. Include when the warranty starts, so months in storage do not eat into cover after installation.

The release plan also states who pays the extra freight and handling, when balances fall due, the final collection date and what cancellation or postponement is allowed; a later shipment date does not by itself move the payment date or change the right to cancel.

A nonbinding forecast helps the factory plan and counts as committed volume only where the agreement says so. If the later 150 units are a possible future order, availability, price, MOQ and lead time are reconfirmed when it is placed.

9. Negotiate the Constraint That Creates the Excess

A request to “reduce MOQ” gives the factory little to work with. Find the condition that makes the order too large and show the demand by line; a specific proposal, such as combining two colors, is far easier to agree.

Source of excessOption to discussWhat still needs settling
Separate color minimumsCombine colors within a modelMinimum per color and price eligibility
Too many low-volume variantsLaunch fewer finishes or postpone a configurationWhether the narrower range meets customer needs
Custom printed packagingStandard packaging, or a separate packaging runBranding requirements, unused-material cost, storage
Small first commercial orderA transparent small-order premium or setup chargeTotal cost and repeat-order terms
Early warehouse pressureStaged releasesFull commitment, payment, storage and release terms
Uncertain future demandSeparate later orders instead of one firm large batchRepricing, availability and replenishment lead time

Weigh the total effect of each option. A small-order premium can cost less than financing and holding unwanted stock; standard packaging lowers the first commitment but can be wrong for a retail channel that needs a particular language or label; staged delivery frees warehouse space but does not reduce the purchase exposure.

Keep the configuration that fits the door, market and users; an easier MOQ is no reason to change it.

10. Confirm the Final Order Plan in Writing

The final record lets another buyer reproduce the calculation without having been in the negotiation. Keep the factory's dated confirmation with the quotation and purchase order.

Start with one worksheet that carries each line from demand to purchase quantity. The rows below use Scenario C from section 4; copy the columns into your own sheet.

Order lineNet demandMOQ groupGroup minimumOrder multiplePurchase quantityUnits above demand
A2 / stainless steel60A2 (colors combine)100 for the groupNone600
A2 / Athens black40A2 (colors combine)100 for the groupNone400
A11 / stainless steel50A1150None500
Total1501500
RecordDetail
Order linesModel, finish, configuration, packaging version and quantities
Demand basisPlanning period, firm demand, forecasts, usable stock, intended buffers
Quantity rulesMinimums, groups, line conditions, multiples, minimum order value
Price conditionsTier threshold, eligible assortment, currency, quotation validity
Approved purchaseQuantity per line and units above the demand plan
Additional materialsPackaging or component commitments and leftover-stock arrangements
Production and deliveryFirm quantities, batch timing, release quantities, forecast-only volumes
Cash obligationsDeposit, balance, storage charges, payment triggers
Held stockOwnership, location, protection, reporting, release deadline, warranty timing
Future changesRepeat-order rules, permitted revisions, cancellation terms, items to reconfirm

Where a confirmation is incomplete, name the open condition and its effect: “100-unit model minimum confirmed; minimum per color still unanswered” gives the next step, where a bare approval flag gives none.

The purchase approval also says why any quantity above current demand is acceptable: expected sales, a scheduled later project, justified service stock or another concrete reason. Without one, revisit the mix or the commercial arrangement before the order goes out.

Frequently Asked Questions

What is a typical MOQ for smart locks?

It follows how far the order moves from a standard model: a standard model and finish needs far less than a new finish, custom packaging or new parts. On our locks MOQ is set per project; the figure that matters is the minimum for your model, finish, customization and order stage, with the grouping rules and the quantity behind the quoted price. For a sense of scale, one private-label range on an existing platform of ours, with only texture, branding and packaging changed, had a first order of 450 sets; that was the customer's quantity, and our minimum is quoted per project.

Is a price break the same as an MOQ?

No. A quantity below the price break can still be accepted at a higher price. The minimum accepted order and each price tier's threshold are separate figures on the quotation.

Does staged delivery reduce MOQ?

No. It changes when goods arrive, but the full production quantity can still be committed; production, payment, ownership, storage and cancellation terms decide the real commitment.

Will a trial-order MOQ remain available later?

Only where it is agreed for repeat orders, since a trial quantity often covers the first order alone. Repeat-order quantity, configuration, packaging and price are reconfirmed before replenishment is planned around it.

References

  1. Microsoft Learn, Default order settings for dimensions and product variants. Minimum, maximum, multiple and standard quantity as separate settings in Dynamics 365.
  2. IFRS Foundation, IAS 2 Inventories. Official overview of inventory measurement at the lower of cost and net realizable value for entities applying IFRS.
Next Step

Get the MOQ for Your Assortment

Send the models, finishes, packaging and quantity you need per line. We confirm the minimum, how lines can combine and the price for that assortment, in writing.